News

New Pulse Receiver Available

TechnoTree Technologies is announcing the availability of its new Pulse type receiver that allows remote control of amp racks, moving component drawers, trunk deck solenoids, actuators and other motorized 12-volt accessories. The Pulse receiver is used to activate functions versus turning them on and off, as with our original Switch receiver. PulseReceiver The new Pulse receiver is compatible with the current 9 and 5-button keypads and can be used in conjunction with the Switch type receiver to create a really unique customized vehicle.

TechnoTrees distributive Pulse receiver system eliminates the need to run wiring back to a central point, usually under the dash, and mounting banks of switches to control various 12-volt accessories. The TechnoTree receiver can be utilized wherever you can tap into a 12-volt source and that makes it the industrys most flexible and easiest system to install. The keypad controls 4 to 8 zones or functions depending on model, plus an all off switch. The system is programmable and flexible so you can create and control your own show vehicle. For a limited time, shipping is FREE by USPS Priority Mail. If you are a qualified dealer/jobber please contact our customer service department for special programs and pricing.

SEMA Show Motorcycle Winner

Kool Technologies is pleased to announce that John Young, owner of Back Alley Motorsports in Pacoima, CA is the winner of the mini sport cycle raffle at the 2004 SEMA Show in Las Vegas, NV. Attendees that stopped by the TechnoTree Technologies booth and watched a product demonstration were entered into a raffle for a gas powered, 49cc mini sport cycle that was on display.

K Booth personnel were demonstrating TechnoTree Technologies new (Patent Pending) remote control system for 12-volt automotive accessories. Currently two different receivers are offered. A Switch type receiver to remotely turn neon, strobe, LED and other types of auxiliary lighting on and off. A new Pulse type receiver was also shown that remotely activates amp racks, moving component drawers, trunk deck solenoids, actuators and other motorized 12-volt accessories. Both units are available with either a 5 or 9-button keypad remote control.

K The unique distributive receiver system makes it the industrys easiest to install since it eliminates the need to run all the accessory wiring back to a central location, usually under the dash, and eliminates the need to wire a bank of switches to control the various accessories. The receiver units are very easy to install since they only have two wires, both 12-volt and ground. You simply tap into 12-volts anywhere on the vehicle you are working and then attached the other wire to the accessory. The keypad is programmable allowing the user to create a unique show or street vehicle.

New 5-Button Key Fob

TechnoTree Technologies introduces a new 5-button key fob style keypad for its unique 12-volt accessories remote control system. The new keypad is the companion to the existing 9-button keypad that was introduced earlier in the year. The 5-button keypad is fully compatible with TechnoTrees current switch type receiver that remotely turns 12-volt accessories on and off. It will also be compatible with a new pulse type receiver when it is introduced at a later date. The systems unique distributive receiver eliminates the need to run all the accessory wiring back to an under dash location and the need to install a bank of switches to control the various accessories.

The receiver is very easy to install since it only has two wires, both 12-volt and ground. You simply tap into 12-volts anywhere on the vehicle where you are working and attach the other wire to the accessory. 5-Button-Key-Fob The 5-button remote keypad controls 4 zones or functions plus an all off button to shut the entire system down. The keypad is programmable allowing the user to create a unique show or street vehicle. The system is quality engineered to ISO 9001:2000 Standard Requirements and is manufactured in the USA. Patent Pending.